600 and M600 Series countersinks offer the advantage of replacing the pilots as they wear out or hole sizes change. made from the finest cobalt high speed steel. 100 degree angle is stocked. Other angles are readily available.
M600 SERIES |
||||
| TOOL NUMBER | "D" BODY DIA. | "PH" PILOT HOLE | NUMBER OF FLUTES | "S" SHANK |
| M600 | 10 | 2.00 | 2 | 6 X 100 |
| M602 | 14 | 2.00. | 2 | 8 X 100 |
| M603 | 14 | 2.50 | 2 | 8 X 100 |
| M604 | 14 | 3.50 | 2 | 8 X 100 |
| M605 | 17 | 3.50 | 2 | 8 X 100 |
| M606 | 17 | 5.00 | 2 | 8 X 100 |
| M607 | 21 | 5.00 | 3 | 8 X 100 |
600 SERIES |
||||
| TOOL NUMBER | "D" BODY DIA. | "PH" PILOT HOLE | NUMBER OF FLUTES | "S" SHANK |
| 600 | 3/8 | 5/64 | 2 | 1/4 - 28 |
| 601 | 7/16 | 5/64 | 2 | 1/4 - 28 |
| 602 | 1/2 | 5/64 | 2 | 1/4 - 28 |
| 603 | 1/2 | 3/32 | 2 | 1/4 - 28 |
| 604 | 1/2 | 1/8 | 2 | 1/4 - 28 |
| 605 | 5/8 | 1/8 | 2 | 1/4 - 28 |
TOP OF PAGEISO 9001:2008 Certified
| Copyright © Craig Tools International, 2009. All Rights Reserved |