Craig Tools International - Online Catalog


	A.N.D. 10050 and MS33649 PORT CONTOUR CUTTERS AIRCRAFT COUNTERBORES, HOLLOW CUTTERS BURRING CUTTER COUNTERSINK EXTENSIONS CUPPED SQUEEZER SETS DIMPLING TOOLS/RETAINER SPRINGS DRILL ADAPTERS/DUPLICATING PUNCHES DRILLS AND REAMERS FLUSH RIVET SETS .401 - .498 SHANK FLUSH SQUEEZER SETS LONG SERIES AIRCRAFT COUNTERBORES MICROSTOP COUNTERSINK UNITS OFFSET ANGLE DRILLS, COLLET CHUCKS, AIR VACUUM OFFSET RIVET SETS .401 SHANK OFFSET RIVET SETS .498 SHANK REVERSE COUNTERSINKS REVERSE SPOTFACERS RIVET SET SHANKS STANDARD AN RIVETS RIVET SETS S.A.E. (MS 16142) PORT CONTOUR CUTTERS SHEET FASTENERS PLIERS SHORT SHANK FLUSH RIVET SETS SOLID CARBIDE COMPOSITE CUTTING TOOLS SPEED DRIVER STOP COUNTERBORES STOP COUNTERSINKS STRAIGHT RIVET SETS .401 SHANK STRAIGHT RIVET SETS .498 SHANK STRAP DUPLICATORS VERSI-SINKS, PCD CUTTERS

	PCD COUNTERSINKS - WITH OR WITHOUT CONTROLLED FILLET RADIUS PCD COUNTERBORES -STRAIGHT OR THREADED SHANK PCD REAMERS -STRAIGHT AND THREADED REAMERS PCD dRILLS- STRAIGHT FLUTE, 15 DEGREE OR 30 DEGREE HELIX PCD ROUTERS - STRAIGHT, CHAMFER OR ANGLE PCD DRILL COUNTERSINK & REAMER COUNTERSINK - REAMER OR DRILL STYLE TOP OF PAGE

	VS SERIES - VERSI-SINK SYSTEM 700 PCD & M700 PCD SERIES - PCD TIPPED COUNTERSINKS SPECIAL PCD TOOLS - POLYCRYSTALLINE DIAMOND TOOLS TOP OF PAGE

	150 CT SERIES - CARBIDE TIPPED STOP COUNTERSINKS 150 SC SERIES - SOLID CARBIDE STOP COUNTERSINKS 150 PCD SERIES - INTEGRAL PILOT POLYCRYSTALLINE COUNTERSINKS 250 SERIES - HIGH SPEED STEEL UNDERCUT BODY COUNTERSINKS 150 & M150 SERIES - HIGH SPEED AND COBALT ST0EEL STOP COUNTERSINKS 350 SERIES - STRAIGHT SHANK PILOTED COUNTERSINKS 700 & M700 SERIES - CARBIDE TIPPED STOP COUNTERSINKS 600 & M600 SERIES - COBALT HIGH SPEED STEEL COUNTERSINKS TOP OF PAGE

	730 SERIES - CARBIDE TIPPED STOP COUNTERSINKS 755 & M755 SERIES - PILOTS FOR CARBIDE TIPPED STOP COUNTERBORES & COUNTERSINKS TOP OF PAGE

	OFFSET ANGLE DRILLS DRILL/COLLET CHUCKS HAND HELD AIR VACUUM TOP OF PAGE

	MICROSTOP COUNTERSINKING UNITS TOP OF PAGE

	848 SERIES - HIGH SPEED STEEL AIRCRAFT COUNTERBORES HC SERIES - HIGH SPEED STEEL HOLLOW CUTTERS 850 SERIES - CARBIDE TIPPED AIRCRAFT COUNTERBORES 855 SERIES - PILOTS FOR AIRCRAFT COUNTERBORES HSA SERIES - COARSE TOOTH HOLE SAWS AND ARBORS HSC/HSF SERIES - COARSE AND TOOTH HOLE SAWS AND ARBORS TOP OF PAGE

	180 SERIES - HIGH SPEED STEEL REVERESE COUNTERSINKS 181 SERIES - CARBIDE REVERSE COUNTERSINKS 185 SERIES - PLAIN PILOTS FOR REVERSE COUNTERSINKS & SPOTFACERS 186 SERIES - STEP PILOTS FOR REVERSE COUNTERSINKS & SPOTFACERS TOP OF PAGE

	190 SERIES - HIGH SPEED STEEL REVERSE SPOTFACERS 191 SERIES - CARBIDE REVERSE SPOTFACERS 185 SERIES - PLAIN PILOTS FOR REVERSE COUNTERSINKS & SPOTFACERS 186 SERIES - STEP PILOTS FOR REVERSE COUNTERSINKS & SPOTFACERS TOP OF PAGE

	H49P SERIES - A.N.D. 10050 & MS 33649 PORT CONTOUR CUTTERS H49R SERIES - A.N.D. 10050 & MS 33649 PORT CONTOUR CUTTERS 49P SERIES - A.N.D. 10050 & MS 33649 PORT CONTOUR CUTTERS 49R SERIES - A.N.D. 10050 & MS 33649 PORT CONTOUR CUTTERS TOP OF PAGE

	H42P SERIES - S.A.E. STRAIGHT THREAD TUBE FITTING (MS 16142) PORT CONTOUR CUTTERS H42R SERIES - S.A.E. STRAIGHT THREAD TUBE FITTING (MS 16142) PORT CONTOUR CUTTERS 42P SERIES - S.A.E. STRAIGHT THREAD TUBE FITTING (MS 16142) PORT CONTOUR CUTTERS 42R SERIES - S.A.E. STRAIGHT THREAD TUBE FITTING (MS 16142) PORT CONTOUR CUTTERS TOP OF PAGE

	CARBIDE TOOLS - FOR ADVANCED COMPOSITES TOP OF PAGE

	CUPPED SETS FLUSH SETS TOP OF PAGE

	CUPPED SETS FLUSH SETS TOP OF PAGE

	CUPPED SETS FLUSH SETS BELL CUPPED SETS TOP OF PAGE

	CUPPED SETS FLUSH SETS BELL CUPPED SETS TOP OF PAGE

	STRAIGHT FLUSH SETS OFFSET FLUSH SETS MUSHROOM FLUSH SETS STUBBY FLUSH SETS TOP OF PAGE

	CORNER GUN SETS DOUBLE OFFSET RIVET SET TOP OF PAGE

	STRAIGHT FLUSH OFFSET FLUSH STRAIGHT CUPPED OFFSET CUPPED TOP OF PAGE

	RIVET SET SHANKS STANDARD AN RIVETS TOP OF PAGE

	CUPPED SQUEEZER SETS CUPPED SETS FOR SEMITUBULAR RIVETS CUPPED SETS .312, .375 SHANK TOP OF PAGE

	FLUSH SQUEEZER SETS FLUSH SETS - .312, .375 SHANK TOP OF PAGE

	PUNCH DIE SQUEEZER SET RETAINER SPRINGS TOP OF PAGE

	LONG SERIES AIRCRAFT COUNTERBORES TOP OF PAGE

	BURRING CUTTER TOP OF PAGE

	COUNTERSINK EXTENSIONS TOP OF PAGE

	SPEED DRIVER TOP OF PAGE

	AIRCRAFT EXTENSION DRILLS THREADED SHANK AIRCRAFT DRILLS PILOTED DRILLS AND REAMERS TOP OF PAGE

	SET SCREW DRILL ADAPTERS DUPLICATING PUNCHES TOP OF PAGE

	HAND RIVET SQUEEZER RETAINER SPRINGS RIVET GUNS SHEET FASTENERS "CLECOS" SHEET FASTENERS PLIERS DRILL STOPS TOP OF PAGE

	SPRING TYPE BUSHING TYPE BUSHING TYPE INVERTED TOP OF PAGE